Telephone : 01993 622790/07835 169085

How to Order

How to Order

RxMono3D logo

 

These glasses are designed to be used with one system out of RealD, Imax 3D or sunglasses. For MasterImage 3D and passive 3DTVs, select RealD glasses.

 

The first choice is the polariser. For the RealD glasses, select either RealD 3D or 2D (2D glasses convert 3D into 2D), depending on whether you would like 3D or 2D glasses. For Imax 3D glasses there are four options. These are for 3D or 2D glasses with either (0°/90°) or (45°/135°) polarisation. These angles relate to the orientation of the polarisation of the right and left images. In some Imax 3D cinemas these are set at 0° and 90°, and in others they are set at 45° and 135°. It is important to get this right as the incorrect ones will not work. We have listed a few Imax cinemas by the orientations used in the glasses description.

 

The next choice is the glasses case. You can choose one of the following glasses cases:

 

                 Rigid glasses case                                         Soft glasses case                               Drawstring bag

 

You will also get a microfibre lens cleaning cloth.

 

 

The next thing to select is an Rx insert. The Rx insert is designed to hold a pair of prescription lenses. If you are ordering non-prescription lenses you can choose to order a pair of unglazed inserts which you can take to your local opticians. You can also select this when ordering prescription glasses. If you do this, you must enter some values into the left and right spheres and cylinders drop-down menus, lens type and a pupillary distance. We recommend entering 0 into the spheres and cylinder options, single vision lenses and any number for the pupillary distance. You can also order a glazed insert. If you do, you must complete the prescription form (see below).

 

The last option is for optional spare polarisers. Although these glasses are primarily designed for use with only one system, it is possible to replace the polarisers. Just pick any spare polariser you would like. To replace the old ones, push them out from the inside. Then place the new ones from the outside. This may involve a small amount of gentle bending. This can be a little fiddly, particularly in a darkened room.

 

   

 

Ordering RxMulti3D glasses is the same as the RxMono3D, except you can select more than one pair of polarisers. These are held in clip in lens holders which clip into the frames. You must select at least one pair. The 3D collection consists of 3D polarisers for RealD, Imax 3D (both (0°/90°) and (45°/135°) and sunglasses (four pairs for the price of three). The 2D collection is the same, except 2D instead of 3D polarisers. The RxMulti3Di has integrated prescription 3D lenses for RealD 3D and 2D only.

 

Prescription Lenses

 

Peoples prescription consists of up to five sets of elements: spheres, cylinders, axis, additions and prism. There are six sets of these, three for each eye. These are for distance, intermediate and near vision. For single vision lenses, complete the two distance vision rows, even if the prescription is for longsightedness. Complete the near vision rows if ordering bifocals and all three for varifocal lenses. Make sure you select bifocal or varifocal lenses from the lens type menu if you want these, otherwise we will supply single vision lenses for distance by default, unless you tell us otherwise.

 

This is our form for entering your prescription details.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Spheres (SPH)

 

The sphere is the strength of the lenses required to correct for lack of focus and is measured in Dioptres. A positive value is for long-sightedness (hyperopia), and minus for short-sightedness (myopia). Plano, PI and ∞ all mean zero power for spheres, so enter 0. Values can go from -48 to +40 in steps of 0.25. Our website currently supports spheres from -10 to +9 Dioptres. If you need something stronger, email and we will try to arrange something.

 

Cylinder (CYL)

 

The cylinders is the measurement of astigmatism, which is where the eye is misshapen, shaped slightly like a rugby ball rather being spherical. This causes the eye to have difficulty in focusing at certain angles. This is measured in Dioptres and values range from -6 to +6 in steps of 0.25. Make sure you get the sign right. If no value is supplied, enter 0.

 

Axis (AXIS)

 

The axis is the direction of the astigmatism and is given in degrees from 0° to 180°. This is only given if there is a value for cylinders other than 0. If this is the case, just leave this field blank.

 

Additions (ADD)

 

The ADD (an abbreviation for reading addition) is the additional correction needed for reading and is used for reading, bifocal and varifocal glasses. It is a measurement of how much extra power above the distance prescription for near and intermediate vision and is given in Dioptres. Values range from +0.5 to +3.5 in steps of 0.25.

 

This is only required for reading and close work, with bifocal and varifocal lenses. If the glasses are only going to be used for distance vision, additions are not needed. If only one value is given, use it for both eyes. Additions are nearly always the same for each eye.

 

Prescriptions for bifocal and varifocal can written either with additions or with sets of spheres and cylinders. For example, the following prescription can be written thus:

 

  Spheres Cylinders Axis Additions
Right -2.00 -1.00 100° +1.50
Left -1.00 -0.75 40° +1.50

 

Is the same as

 

  Spheres Cylinders Axis
Right Distance -2.00 -1.00 100°
Right Near -0.50 -1.00 100°
Left Distance -1.00 -0.75 40°
Left Near +0.50  -0.75 40°

 

 and

 

  Spheres Cylinders Axis

Intermediate

Additions

Near

Additions

Right -2.00 -1.00 100° +0.75 +1.50
Left -1.00  -0.75 40° +0.50 +1.25

 

Is the same as

 

  Spheres Cylinders Axis
Right Distance -2.00 -1.00 100°
Right Intermediate -1.25 -1.00 100°
Right Near -0.50 -1.00 100°
Left Distance -1.00 -0.75 40°
Left Intermediate -0.50 -0.75 40°
Left Near +0.25 -0.75 40°

 

Prism (PRISM)

 

Prisms are used to correct lazy eye and other special conditions which require the focus image to be moved, such as squint. This is measured in dioptres and ranges from 0.5 to 10 in steps of 0.25.

 

Lens Type

 

We offer 5 lens types. These are single vision, bifocal (flat top), bifocal (circles), varifocals (progressives) and varifocal (degressives). Single vision are our basic lens which will correct for either short or longsightedness. Bifocals consists of two lenses, one inside the other. The inner lens can be either circular or half-circles. Varifocals are lenses with a range of strengths. There are two types of varifocal lenses, progressive and degressive. Progressive lenses prioritise distance vision over near vision, whereas degressive prioritise near vision over distance.

 

 

Pupillary Distance

 

This is the distance between the centre of one pupil to the centre of the other, measured in millimetres. Normally this is given as one number, but can be given as two numbers. If they are the same, add them up, otherwise, enter their sum in the pupillary distance field and the two numbers in the notes.

 

Unfortunately, opticians do not have to include this on their prescription form, and often choose not too, to encourage you to buy their glasses. However, ideally they should provide this, and if they do not, we recommend that you demand that they do. We particularly recommend you get an optician to measure your pupillary distance if the strength of your lenses is greater than ±4. If you cannot or do not want to go to your opticians for this, you can measure this yourself using one of the following methods:

 

Method 1: Ask your partner or friend to help you.

 

With your friend sat or standing at about the same height, have a ruler placed across the bridge of your nose upside down so that the millimetre or centimetre edge is closest to your eyes. Your friend then lines up the zero line in line with the centre of the left pupil (on their right) whilst closing their left eye. Then, without moving, measure the distance to the centre of the right eye, closing their right eye to do so. Closing their eyes will prevent parallax errors. Best results are achieved if you fix your gaze on the bridge of the nose of the person taking the measurement.

 

Method 2: Taking a measurement yourself using a mirror

 

This is easily measured looking in a mirror and using a ruler! Stand in front of a mirror at a distance of about 20cm (8 inches). Close your right eye and place your ruler flat against the mirror and align it horizontally with the millimetre scale pointing upwards. Looking over the top of the ruler with your left eye, align the zero mark of the ruler in the centre of your left pupil. Now open your right eye and close your left but keep your head still and the ruler in the same position. Read the millimetre measurement corresponding to the centre of your right pupil. To be sure, you can repeat this process a few times for consistency

 

Method 3: Marking pupils on your glasses With the help of a friend

 

Put your glasses on and ask your friend to stand in front of you and mark a dot on your glasses directly above your pupils left and right. Please be sure to use a NON PERMANENT MARKER PEN. With a ruler, measure the distance between the 2 dots

 

Examples of Prescriptions

 

NHS Form:

 

 

The prescription given on this form is:

  Spheres Cylinders Axis Additions
Right -0.75 -1.00 100 0
Left -1.50 -0.75 100 0

 

The completed form should be as follows:

 

 

Boots Opticians:

 

 

The prescription for these glasses

 

  Spheres Cylinders Axis Additions Prism Prism Direction
Right -1.75 -0.50 40 0 0.50 In
Left -2.50 -0.25 145 0 0.50 In

 

The completed online form should be as follows:

 

 

Tesco Opticians

 

 

The prescription for these glasses is

 

  Spheres Cylinders Axis Additions
Right -1.75 -0.50 60 +0.75
Left -2.25 -0.50 145 +0.75

 

The completed online form should be as follows:

 

 

NHS Form for bifocal lenses:

 

 

  Spheres Cylinders Axis
Right distance -0.75 -1.00 100
Right near +1.50 -1.00 100
Left distance -0.50 -0.75 100
Left Near +0.75 -0.75 100

 

The completed online form should be as follows:

 

 

NHS Varifocal Prescription:

 

 

  Spheres Cylinders Axis Intermediate Additions Near Additions
Right  -0.75  -0.50 100 +1.00 +1.75
Left  -1.50 -0.75 100 +1.00 +1.75

 

The completed form would look like this:

 

 

 

Alternatively, the prescription is the same as this:

 

  Spheres Cylinders Axis
Right distance -0.75 -1.00 100
Right intermediate +0.25 -1.00 100
Right near +1.00 -1.00 100
Left distance -1.50 -0.75 100
Left intermediate -0.50 -0.75 100
Left Near +0.25 -0.75 100

 

The completed form will look like this:

 

 

Click here to Download this as a PDF, 

© Optics 3D Ltd

Web design Dorset Weymouth and Portlandweb design cartertonweb design witneyWeb design Weymouth and Portlandweb design oxfordshire